All-in-One Automatic Sensor Mixer
Product: Automatic Sensor Mixer
Model No.: RJY-11-S201D
Technology: Infrared Sensor
Power Supply: DC6V
Body Material: SUS 304
Sensor Distance: 5-8cm for hand
Inlet/Outlet Size: G1/2”
RJY-11-S201D
$2.00
Description
This sensor tap is made of stainless steel with chroming. Stainless steel is durable and widely used in bathrooms and public restrooms. It is single hole design for the wash basin installation. The sensor tap is also called sensor faucet, touchless faucet, automatic faucet, touch free faucet. The sensor is on the faucet body, when people get close to the faucet, putting their hand in the sensor detect area, the sensor will activate water flow automatically, and the water will stop when you take your hand away. Or waiting after the setting minutes, normally 60 seconds and the water automatically stops.
As the most important part, the work of the sensor is to forward the signals to the valve to turn on the faucet after detecting your hand. Its job is to inform the valve when to start or stop the flow based on the presence or absence of your hands. The infrared sensor life span reaches to 500,000 circles, lasting more than 10 years.
A touchless faucet uses active infrared sensor technology that allows you to start the flow of water without touching the faucet. Instead, just place your hand to the sensor, the faucet will start water flowing, and the water will stop when you take your hand away. If you forget to close the no-touch faucet, the sensor IC and program will control the water to stop automatically after 1min continuously flowing, and this timing can be tailor-made and set by a remote controller.
More excitingly, the faucet RJY-11-S201D design is stylish and elegant to fit all basins, sink or lavatory from classic to modern.
• Touchless automatic sensor: Put your hand in the sensor range without touch, water flows, leave the sensor range, water stops. Water stops automatically after 1min continuous flow.
• Built-in sensor and solenoid valve
• Cold & hot water mixer: There is a manual handle to adjust the water temperature and the water temperature will be showed on the tempered glass panel.
• Water saving: Water efficient faucet reduces overall water usage without sacrificing water, which saves water than regular manual kitchen faucet. Water stops automatically after 1 min continuous flow.
• Energy saving: Battery shall last approximately 3000 times/month for two years.
• Low power indication: This may indicate it is time to replace existing batteries with new ones or there is not enough power.
• Healthy and Safe: with touch-free faucet for the basin, it can prevent the spread of bacteria and germs. It’s not only time-saving but also hygienic.
