Deck-mounted Sensor Basin Faucet
Product: Smart Basin Faucet
Model No.: RJY-11-B106AD
Technology: Infrared Sensor
Power Supply: DC6V&AC220V
Body Material: Brass
Sensor Distance: 18-22cm (Hands)
Inlet/Outlet Size: G1/2”
RJY-11-B106AD
$36.00
Description
This faucet uses active infrared sensor technology that allows starting the flow of water without touching the faucet. The faucet is for cold water only, but it can be with a mixing valve that can turn the cold water to be mixing hot water. Both the touchless faucet and mixing valve can be easily installed. It’s a commercial touchless faucet that can be widely used in public restrooms or home bathrooms.
It is made of brass with high quality chroming surface. Brass is durable and widely used in bathrooms and public restrooms. It is single hole design for the wash basin installation. The sensor tap is also called sensor faucet, touchless faucet, automatic faucet, touch free faucet. The sensor is on the faucet body, when people get close to the faucet, putting their hand in the sensor detect area, the sensor will activate water flow automatically, and the water will stop when you take your hand away. Or waiting after the setting minutes, normally 60 seconds and the water automatically stops. The item RJY-11-B103AD, A means AC power. D means DC batteries power. AD means AC and DC power together.
A touchless faucet uses active infrared sensor technology that allows you to start the flow of water without touching the faucet. Instead, just place your hand to the sensor, the faucet will start water flowing, and the water will stop when you take your hand away. If you forget to close the no-touch faucet, the sensor IC and program will control the water to stop automatically after 1min continuously flowing, and this timing can be tailor-made and set by a remote controller.
As the most important part, the work of the sensor is to forward the signals to the valve to turn on the faucet after detecting your hand. Its job is to inform the valve when to start or stop the flow based on the presence or absence of your hands. The two eyes infrared sensor life span reaches to 500,000 circles, lasting more than 10 years. More excitingly, the faucet RJY-11-B103AD design is stylish and elegant to fit all basins, sink or lavatory from classic to modern. The infrared sensor is on the faucet body and quite easy to be found.
* Touchless automatic sensor With microcomputer smart sensor technology, water will automatically flow out when hands enter into the sensing range, and the water stops automatically after hands leave, which is convenient and hygiene.
* Water saving Water stops automatically after 1min continuous flow. This water efficient faucet reduces overall water usage without sacrificing water, which saves water than regular manual faucet and can effectively save 65% of water.
* Energy saving Batteries shall last approximately 3000 times/month for two years.
* Low power indication When the battery is exhausted, the indicator light flashes and the faucet will no longer discharge water, which may indicate it is time to replace existing batteries with new ones or there is not enough power.
* Healthy and Safe With touch-free faucet for the basin, it can prevent the spread of bacteria and germs. It’s not only time-saving but also hygienic.
The faucet comes with stainless steel material which is durable and eco-friendly, easy to clean and shiny. It is working with Rajeyn’s compact faucet control box RJY-K06 as below.
A sensor faucet control box is a square box that sits or mounted underneath the sink as part of a typical sensor faucet installation process. The control box is like a hub which enables water to flow IN (from main water supply) and OUT (to sensor faucet).
Most of our sensor faucets range come with a control box, except our 2-IN-1 series sensor mixer for cold and hot water, such as RJY-11-B201D and RJY-11-B204D. Rajeyn has different control boxes for both basin and kitchen faucets.
What’s the size of this commercial touchless faucet?
