RJY-22-P101AD

Automatic flushing: pre-flush 2 seconds and after flush 6 seconds. After-flush timing adjustable by remote controller. Adjustable range 3-24 seconds.
Low power reminding: When the battery is low, the indicator light flashes for 10 seconds to remind you of replacing with new batteries. The flush valve will not flush.
Anti-reverse wire connection: The sensor will not be heat or damaged if the power supply wire positive and negative terminals are reversely connected. The sensor will work normally if wires are correctly connected.
Power protection: When the battery or mains power suddenly cut off, the sensor will automatically turn off the solenoid valve within 20 seconds.

The sensor plate integrates the sensor and nozzle for a more compact structure and lower cost.
Adjust the nozzle Angle (open a new nozzle body), it can be used with different types of ceramic bowl with low development cost.
Sensor plate is ABS injection molding. Colorful sensor plates are available.
The sensor plate can directly connect to the solenoid valve or connect with water hose.
Product includes: sensor plate +water outlet hose + solenoid valve +water regulator + water inlet hose + power supply.

ITEMS	Parameters	ITEMS	Parameters
The max Voltage	8V	Sensor Distance	65CM±10%
Working Voltage	DC6V/AC220V(50~60Hz)	Working Life	≥250,000 circles
Static Current	≤25uA	Working Temperature	1~60℃
Working Current	≥300mA	Storage Temperature	-20~70℃
Battery Life Span	≥2Years	Working Pressure	0.05~0.6MPa
Water Temperature	1~60℃	Blasting Pressure	3.45MPa ≤300S
Working Mode	User in the sensor range for 3 seconds, the flush valve will go to 2 seconds pre-flush. User leaves sensor range for 3 seconds, the flush valve will go to 6s after-flush.	Inlet/Outlet Size	G1/2